Professional Auto Glass Tools for Windshield Removal and Installation

Used to clean heavily soiled windscreens and mirrors.

easily removes tough oil, grease and PU remnants

is sufficient for 10 liters

high-performance

produces streak-free glass without any residues

application up to 1:80

good cleaning results also at very low temperatures

skin-friendly, does not contain any toxic contents and is bio-degradable

also suitable for sensitive surfaces, e. g. PVC and vehicle paint

measuring scale on label allows exact mixing

Note: Simply pour the required amount of concentrate into a spray bottle and then fill with water.

This high-viscosity impact filler that cures by UV light is used for repairing larger surface damage from stone impact. After filling and curing of the low-viscosity UV repair resin the impact filler is placed over the damaged area with the sealing foil and is left for curing. This professional product guarentees a smooth and homogeneous repair.

Components: 1 x impact filler 1,5 ml,

1 x resin sealing films, 25 pieces

Characteristic: viscous

This high-viscosity impact filler that cures by UV light is used for repairing larger surface damage from stone impact. After filling and curing of the low-viscosity UV repair resin the impact filler is placed over the damaged area with the sealing foil and is left for curing. This professional product guarentees a smooth and homogeneous repair.

Characteristic: viscous

ATTENTION - DANGEROUS GOODS

PMA/TOOLS polishing compound BB3 is used to polish the repaired stone chip.

A transparent adhesion-promoting agent is necessary if high-quality stone impact repairs are to be carried out using high and low viscosity UV resin. The glass resin primer is applied to the hardened UV resin surface and acts as a support function for the low viscosity impact filler. After 2-3 minutes flash-off time the impact filler can be applied. For small surface damage this primer is also used to clean the damaged area. It prevents any potential loosening of the cured resin from the damaged area.

ATTENTION - DANGEROUS GOODS

PMA/TOOLS UV repair resin BB1 with low viscosity to fill the stone chip.

Components:

1 x UV repair resin BB1, 14 ml,

1 x syringe

Low-viscosity stone damage repair resin with best flow qualities. Easy to use even with larger stone damage, cracks and star-shaped chips.

PMA/TOOLS is not certified to ship hazardous goods by air freight.

Low-viscosity stone damage repair resin with best flow qualities. Easy to use even with larger stone damage, cracks and star-shaped chips.

ATTENTION - DANGEROUS GOODS

PMA/TOOLS UV sealing resin BB2 is used to seal the treated stone chip repair spot.

PMA/TOOLS is not certified to ship hazardous goods by air freight.

Recharger for 7,2 Volt POWERHAND battery.

Voltage (input): 230 Volt

Voltage (output): 7,2 Volt

Put a drop of pit filler resin on a mylar square and place the mylar over the point of impact. Alternatively put a drop of pit filler resin directly on the point of impact and cover it with a piece of mylar. For curing use a UV lamp with a power output of 4 W to10 W. After curing the surface of the pit filler resin can be finished with a razor blade and/or a polish to achieve best results. NOTE: The product should not get in contact with any rubber or plastic parts, nor painted surfaces of the vehicle. In case of contact rinse immediately with plenty of water or glass cleaner.